EQUIPMENT FOR SALE
Matsui/Plas-aid Vacuum Conveying Pump Including:
- Condition: Rebuilt Plast-aid / Matsui
- Model JL6VC-OM
- Cyclone Separator to help reduce fines going to the cartridge filter
- Dust Collector
- Water Cooler for use with Dry Air Conveying
- Voltage: 460/3/60 - 6.3 FL Amps
- Serial # D030
Note: Standard skidding, banding and loading of equipment on truck is Included in pricing.
Crating Equipment will cost extra.Shipping cost are not included.
Price Each: $ 4,650.00
Conair 12 Position, 2.5" Upright Fantail Manifold including:
- Manufacture year of 2007 by Conair
- Condition: Very Good
- 12 Position Upright Manifold including:
- Provides 4 Quick Coupling Positions for 3 different materials
- 12 Male Quick Couplers with Dust Caps, 2-1/2" OD
- Angled Floor Frame
Note: Standard skidding, banding and loading of equipment on truck is Included in pricing.
Crating Equipment will cost extra.Shipping cost are not included.
Price: $ 2,340.00
Conair Tube Loader TLR Including:
- Model TLR/45733
- Vacuum Valve
- Universal Terminal Box
- 24 VDC
- Excellent Condition
- Serial # 195224
Price: $ 675.00
Motan Central Loader Control including:
- Voltage: 120/1/60 - 5 amps
- Part # 9007501
- control for up to eighteen loaders and two vacuum pump
- Serial # SM020446-01
- includes Remote Display Panel for use with the Central Loader Control
- Serial # SM020446-03
Price: $ 2,340.00
Motan Central Vacuum Pump Including:
- Year of Manufacture: 2003
- Manufacturer: Motan
- Model: B115A4AE
- Condition: Rebuilt
- Siemens Blower
- 11.5 HP Seimans
- Voltage: 480/3/60
- 2.5" line size
- Sound level is 74DBA
Price: $4,200
COANIR NEW LARGE DUST COLLECTOR CONSISTING OF:
- Bag House Filter
- Part #: EQP1SYS-1/121631
- Condition: Excellent
- Year of Mfg.: 2009
- Variant: 337846
Specifications:
- 2500 CFM Dust Collector
- 442 sq. ft. of media with an air to media ration of 5.7:1
- 60° carbon steel hopper
- Rotary airlock discharge
- (36) 6” dia x 96” long top load filter-bags
- Air requirement :7.3SCFM @ 90-100 psi
Shipping charges are not included
skidding, Banding and Loading of Equipment is Free.
Complete crating Equipment will cost Extra.
Contact the Sales Department at Schake Industries at 814-677-9333 (Ex: 104) with any other questions.
PRICE: $ 10,540.00
CONAIR PLASTICS SCREENLESS GRANULATOR, MODEL CKKG-250 INCLUDING:
- Low speed 22.5 rpm motor
- Split chamber design for easy cleanout
- Safety interlocks
- Electroless nickle plated cutting housing
- 1 hp motor
- Two rotating blades
- Vacuum take off 1.5" O.D.
- Voltage: 220/3/60
NOTE: WE HAVE TWO OF THESE UNITS
PRICE EACH: $ 4,800.00
CONAIR MODEL PT-450-2I POLYMER PUMP TANK ASSEMBLY INCLUDING:
- PROCESS PUMP 10 HP (126 GPM @ 65 PSI)
- RECIRCULATING PUMP 5 HP (129 GPM @ 35 PSI)
- BACKUP PUMP DUAL SERVICE 10 HP (129 GPM @ 65 PSI)
Pumps mounted on deck and trimmed suction and discharge increasers.3” discharge connection. Manifold is included to allow for manual, pump switch-over compound pressure gages with isolation valves. ITT Triple duty discharge valve.
--400 GALLON INSULATED POLYETHYLENE TANK THAT INCLUDES:
Insulated for chilled water system, automatic make-up float with shutoff valve, overflow connection with rubber coupler and clamps, drain connection with shutoff valve, warm and cold side thermometers, reservoir low level switch, thermostat for high temperature alarm, pressure switch with low pressure alarm, structural steel support frame with solid steel pump deck.
--BALANCING AND SHUTOFF FUNCTIONS
--NEMA 12 ELECTRICAL CONTROL PANEL MOUNTED TO THE PUMP DECK AND:
Pre-wired to (3) pumps, (1) pressure switch, (1) reservoir low level switch and (1) high temp thermostat, IEC-rated motor Starter protectors for each pump, operating light for each pump, control transformer, audible and visual alarm with individual alarm for low level, low process pressure and high temperature.
NOTE:ALL COMPONENTS OF THIS UNIT ARE NEW WITH THE EXCEPTION OF THE MOLDED TANK WHICH CAME OFF A DEMO UNIT.
PRICE: $ 14,000.00
Matsui model DMZ2-40 Dehumidifying wheel dryer system including:
- nominal 20lb/hr drying capacity
- insulated 50 lb drying hopper with long sight glass, drain port slide gate, slide gate discharge
- dual slide gate shutoff for easy draining of hopper
- microprocessor control
- common floor stand with casters
- skidded and shrink wrapped suitable for shipping
- 230/3/60 Voltage.
PRICE AS IS: $ 2,200.00
NOTE: UNIT WILL BE SOLD AS IS. UNIT DOES OPERATE AND TEST OUT TO FACTORY SPECIFICATION ON DEWPOINT ONLY.
DETAILS:Unit was fully tested and all heaters both process and regeneration working properly, thermocoupler operated properly control functions all worked properly, and all other items checked out good. This unit has a brand new control face. The only failure of this unit during test was that the desiccant wheel did not reach proper dewpoint levels, therefore long term this desiccant wheel will need replaced. Pricing does not include a new desiccant wheel. A new wheel is a part number KIT_AA2556 and can be ordered direct through Matsui. NOTE: We can replace the desiccant wheel unit for you for at an additional cost. Please contact us if you would like us to quote this unit with a new desiccant wheel installed.
NOTE: LOADER SHOWN IN PICTURE IS SOLD SEPARATELY AND IS NOT INCLUDED IN PRICE.
NOVATEC NDB-15 DEHUMIDIFYING DRYER INCLUDING:
- 15 LBS/HR DRYING CAPACITY
- 60 LB CAPACITY INSULATED DRYING HOPPER
- DUAL SLIDE GATE SHUTOFF FOR EASY DRAINING
- SIDE DRAIN AND PLUG
- DUAL DESICCANT TANKS WITH 13X DESICCANT
- COMMON FLOOR STAND WITH CASTERS
NOTE: ALL HEATERS WORK, REGENERATION CYCLE WORKED AND A -40 DEG. F DEWPOINT WAS ACHIEVED DURING TEST OF UNIT
PRICE: $ 4,850.00
Well used engineer with high mileage.
In fair condition and in need of a hair cut and body overhaul.